GASKET SHEET / JOINTING SHEET

Jointing Materials are sealants used for applications across chemical plants, refineries, and thermal applications. Jointing Sheets are cut out in various sizes to form a compressible leak-proof seal between two surfaces or components.

These Gasket Sheets are flexible and robust to be used in applications that involve acids, high temperature, corrosive chemicals gases or fluids. The flexibility and good recovery of these sheets prevent breakage during installation. Our imported Gasket Sheets comes in many grades and a wide range of thicknesses to allow for different sealing applications.

We deal in premium brands for this soft sealing material, it has been specifically designed to master the rigors of high-temperature sealing applications. It is the preferred choice for utilization scenarios involving exhaust pipes, turbines, turbochargers and fuel lines, and can withstand temperatures of up to 550 °C in continuous operation.

Our top notch material offers excellent resistance in areas such as temperature, mechanical or chemical, which are required by the corresponding target industry.

These sheets are divided into following categories:

Asbestos Jointing Sheet
Asbestos Jointing Sheet Graphite, with Wire
Non-Asbestos Jointing Sheet
Acidit Jointing Sheet

Available Brands: KLINGER, SANDA & TECNIT.

Technical Index for Asbestos Gasket Sheet

Operating Temperature: Up to 550 C
Maximum Pressure: Up to 130 bar
Thickness Range: 0.5 mm to 6 mm
Dimensions KLINGER: 60” X 80”
Dimensions SANDA/TECNIT: 1520 X 1360 MM

Technical Index for Asbestos Gasket Sheet Graphite, with Wire

PTFE

PTFE (polytetrafluoroethylene), also known as Teflon, is a fluorocarbon-based synthetic polymer extensively utilized in various industries and products. For example, PTFE is a preferred material for electrical and thermal applications like coil separators and terminals, as well as high-temperature seals, insulators, and bearings due to its low coefficient of friction, excellent electrical properties, high chemical resistance, and stability over a wide range of temperatures

PTFE is used as a cost-effective solution for oil & gas, pharmaceutical, chemical processing, industrial, electrical/electronic, and construction sectors.

Available Brand: TBA

PURE PTFE PACKING

Pure PTFE is made from unadulterated PTFE resin with no added materials. It retains flexibility at low temperatures, is an excellent electrical insulator, and is very resistant to chemicals. Pure PTFE is widely utilized in food and beverage, pharmaceutical, and cosmetic applications and is FDA approved.

Technical Index for Pure PTFE Packing

PH range:   0~14
Temperature:   260°C
Velocity:   0~20m/s
Pressure:   0~4MPa
Density:   1.4~1.6 g/cm3

PTFE PACKING

Asbestos PTFE Packing is formed by inter braided method from fine white asbestos yarn to foam very dense and flexible packing. Each thread is individually impregnated with PTFE lubricants.

Technical Index for PTFE Packing

PH range: 3~14
Temperature: 280°C
Velocity: 12m/s
Pressure: 3~20MPa

LEAD PACKING

Sealing with real lead seals is one of the most traditional sealing methods. The seals are made of lead for extremely reliable operation.

Technical Index for Lead Packing

PH range 0 – 14
1650°C Non oxidizing condition
Temperature 650°C Steam
450°C Oxidizing condition -204°C Cryogenics
Pressure 9~45MPa
Velocity 2~15m/s

PTFE GRAPHITE PACKING

Graphite/PTFE line of compression packing products combine the heat dissipating characteristics of graphite with the chemical resistant and durability of PTFE. This combination makes this packing a versatile product for pumps and valves, and for rotating equipments such as mixers and agitators. Furthermore, these packings are great for sub-optimal mechanical conditions including pumps where there is an axial or elliptical shaft run out, worn pumps, and deflecting shafts.

Technical Index for PTFE Graphite Packing

PH range 0~14
Temperature 260°C
Velocity 0~20m/s
Pressure 0~4MPa
Density 1.4~1.6 g/cm3

PURE GRAPHITE PACKING

Pure Graphite Packings are intended to offer high temperature capability, good chemical resistance and markedly reduced spindle wear.

Pure graphite packing is suitable for plant wide applications with excellent chemical and temperature resistance. Manufactured from expanded graphite for outstanding sealing ability.

Suitable for high pressure, high temperature applications.
Offering excellent sealing and operational reliability for both Original Equipment Manufacturers and plant users alike
Fire-Safe

Technical Index for PTFE Graphite Packing

Technical Index for Pure Graphite Packin